PDA

View Full Version : np 203 transfer case/shifter


larrymct
11-24-2000, 01:39 PM
My brother has a totally rebuilt 77 chevy side step. He cannot figure out how to get the shifter installed. We would greatly appreciate help from anyone who can assist. Thanks.

Chuck Smith
11-28-2000, 01:43 AM
E mail me. I have a diagram that should help you. I will send it to you as a jpg file.

~Chuck
csmith669@aol.com

3/4tonTodd
11-30-2000, 10:15 PM
larrymct

I have a 76 K20 and in my cab, under the carpet, the center section of floor is just held in place with screws. I can just pull that up to get my shifter in and out.

I have a different problem though - I assembled my shifter incorrectly and can't get it to work. See my post on that for more. And if you have any advice, I'd love to hear it!!

Todd

Chuck Smith
12-02-2000, 01:37 PM
I have no idea where I got this from ;)

Too large to post here on Lawnsite. Well, I'll try it anyway, but don't blame me for how long it takes for this page to load here!

<img src="http://www.chuckschevytruckpages.com/images/203shiftdiagram.jpg">


~Chuck

mike reeh
12-06-2000, 01:18 AM
I have often wondered what would happen if I took apart the linkage on my spare np203.. I dont dare mess with it :) I also wondered if there was such a thing out there that tells how to assemble it but figured Id never see such a thing. That pic is something Ill definately be saving, for future reference.


good work chuck :)

mike