PDA

View Full Version : Perma Green & Lesco Momentum


ParkerLawn
03-29-2004, 02:44 PM
I was wanting to know at what rate are you all mixing in the tank? I am just not getting the results I want with Lesco. I am putting 12 ounces of Momentum per 8 gallon tank and adding Spreader Sticker as well and having a hard time with 1 app doing the job. Is anyone else experiencing this problem using Lesco products with the PG unit? I have it figured that my app rate should be at 1.5 ounce per 1k with 12 ounces momentum per 8 gallon tank. Any help or suggestions are appreciated.

scottt
03-29-2004, 03:06 PM
The problem is you're only putting down .33 oz per k. It looks like you multiplied 8 gallons times 1.5 oz. You need to multiply 1.5 and 34. 34 is how many thousand feet one tank will cover. At 1.5 per k , you should add 51 ounces of momentum. It's hard to get good control with 20% of your intended strength.

TSM
03-29-2004, 06:36 PM
yeah, like Scottt says. your 8 gal tank will treat 34,000sf

34 X 1.5 = 51oz

Now, if LESCO told you the rate of 12oz per 8 gal, then I'd go back to them and demand a credit on the momentum you have used.