PDA

View Full Version : Gotta question


RJHLandscaping
04-02-2004, 05:44 PM
I once saw a sheet with set labor hours for plantings. I have a tree job, eight foot dogwood, and cant figure out how many hours to charge for. Really I'm still iffy on the mark-up. Has anyone else ever seen this info? Do standardized labor hours exist?

kamor4
04-03-2004, 04:03 AM
you might try an internet search on Vander Kooi & Associates inc
P.O. Box 621759
Littleton, CO 80162
They have a book titled:
Labor & Equipment
Production Times for Landscape Contractors
By Charles Vander Kooi

Or try a search for Nilsson Associates
they have a book titled:
Labor time data handbook

I don't have an address for them

also do a search for R.S Means they produce a whole series of estimating books and a couple on landscaping maybe of interst to you.

the two book i listed above say a 32" ball dug by hand should take form 27min to 47 min or by a small backhoe 7 min to 15min of course this is just the time actually digging the hole only.

the other book says:
3" cal 36"ball would take from four to six hour to dig by hand or about 20 mins with a small backhoe

I hope this helps. as you will find out no two sources of information will be the same