PDA

View Full Version : Pine needle coverage per k/sf?


hartlawnmain
04-11-2004, 07:26 PM
I have a customer who wants all beds and a natural area needled. It's approximately 4,000 sq. ft including shrubs. Is 80 sq. ft per bale about right or am I off on this?

glennd
04-11-2004, 07:48 PM
Hartlawnmain, I think that 80 sq ft per bale is spreading it pretty thin. I know with 1 cubic ft of mulch spreading it 3 " deep will do a 10 X 10 area....2 " deep will do a 12 x 12 area. With pine needles, with that much square footage, I'd estimate 160 bales covering a 5 x 5 area.

Someone else might have other ideas, that's just mine. Good luck.