PDA

View Full Version : Oil Viscosity


ple_1969
05-13-2004, 07:11 AM
Terry,

What weight oil is put in the 17HP Kawasaki at the factory? I have about 10 hours on my TTHP and I’m going to change the oil. My dealer suggested that I use a straight 30W instead of a multi viscosity 10W- 30. Would you agree?

Thanks,
Pete

eXmark
05-13-2004, 11:39 AM
Pete,

Kawasaki recommends a straight 30 weight. The Kohlers need a multi-weight oil.

Thanks,

Terry

ple_1969
05-13-2004, 12:39 PM
Thanks Terry! Would you suggest to change my the filter too? The manual only states an oil change.

Pete

Hawkeye5
05-13-2004, 01:02 PM
I use Mobil 1 5W/30.

eXmark
05-13-2004, 02:54 PM
Pete,

The manual states the service interval for the oil is 100 hours and 200 hours on the filter. I generally recommend 50 hours for both. I’ve seen some guys go 100 hours on the filters with no issues but I have not data that indicates if the 100 hour interval has caused any issues.

Personally I change my oil at 50 hours and always change the filter at that time as well.

Thanks,

Terry

eXmark
05-13-2004, 03:20 PM
Pete,

I double checked with Kaw and looked at the manual agian. You can use the multi-weight oils below say 95 or 100 degrees. The multi-weight oils may increase combustion chamber deposits as well as create a slight increase in oil consumption.

Thanks

Terry