PDA

View Full Version : Pictures of 32 Proline and accelerator


Edgewater
05-14-2004, 10:52 PM
I just wanted to post these of the 32 proline.

moss
06-13-2004, 04:25 PM
How much and how do I get one for my 32" Toro?

PeterA
06-13-2004, 07:38 PM
Moss,
Is your toro the same type as in the picture? If so, you can use the GCEX. In your state, we don't have any dealers. Give me a call and we can ship you a unit. List price is $329.00.

moss
06-30-2004, 08:41 PM
Peter: Your Price is comparible with a steel deck that I can get here. The problem is this: by the time I pay 329 plus another 100$ for the bracket and then fabricate the piece you described to me on the phone, then add shipping and handling, I am paying alot for a 32" bagger. Larry

PeterA
06-30-2004, 11:21 PM
Larry,
Sorry we don't have a catcher available for the toro 32 stamped deck. The deck that edgewater has pictured above is the fabricated deck. I am a bit surprised at how much the toro bracket for the steel catcher is. If the bracket is included in the price with the steel catcher, It would probably make sense to purchase the steel catcher instead of going to all the trouble to buy a bracket and do a further modification for our catcher. If a get a few more requests for a catcher for the 32 stamped deck, I will see about putting one out for next year.

moss
07-04-2004, 11:58 PM
Thanks for your response Peter. Do you have baggers for bigger riders such as Dixie choppers or my 60" Hustler? Larry

PeterA
07-05-2004, 02:14 AM
Larry,
We do have catchers for both these mowers. I would suggest the 6.2 size on a 60 inch deck. The part numbers are GCDIXL for the chopper 60 inch, and GCHUXL for the 60 inch hustler. There are a few pictures on our website of the catchers mounted on a chopper, also on a hustler (the fastrac).