PDA

View Full Version : Scag deck???


John Gamba
05-19-2004, 08:06 AM
Pete
Will the baggers that fit the exmark deck fit on the new scags??

John

PeterA
05-19-2004, 03:52 PM
You can but it would be a bit of a pain to do. You can use a piece of angle bar on the edge of the deck with a hole drilled in it to hook the catcher to (the scag does not have the rim that runs along the edge of the Exmark deck). You would then need to weld in a piece of steel up at the front of the mower opening (where the Scag Advantage deck slopes), and also close off some area at the back where the deck curves in. Whether or not this is worth doing depends on how much benefit it would be to have the catchers interchange. If you have a mixed fleet of Exmark and Scag it might be worth it. Give me a call and I can give you a better idea over the phone of how to do this. Or you can just use the GCSCA or GCSCAXL catchers (same prices as the ones for the Exmark's).

John Gamba
05-19-2004, 04:07 PM
Thanks pete!

It sounds like you would have to do what i did to my gravely stamped 50" deck.
John