PDA

View Full Version : John Deere 737


Steeley
05-27-2004, 09:09 PM
I have a John Deere 737 wondering if anyone has used a accelerator, and how it works on this model, can you use it when the grass is wet? Any help would be great.

PeterA
05-28-2004, 01:33 AM
Steely,
You might want to post your question on the general forum, you may get a few more people to post. We have sold a modest number of catchers for the Deere 7 iron decks, so hopefully you will get some response. You might want to run a search with "Deere" and "Accelerator".

blankenshiplawncare
07-20-2004, 01:29 AM
Steely,

Did you ever get an answer to your question? I have a 717 with a accelerator on it. works like a champ. Peter and I talked about the fact that you have to remove the shoot and install the holder for the bag. I was pretty concerned about this at first but have found with a ratcheting 1/2 box end wrench and a standard 1/2 inch wrench it takes about 90 seconds to change. I don't use the "E" clamp on the shoot anymore I just wrap a little duct tape around the end of the shaft.

blankenshiplawncare
07-20-2004, 01:31 AM
.......................

blankenshiplawncare
07-20-2004, 01:32 AM
........................Grinder modifacation that Peter said would not change any warrantys.

Dave Burrow
08-19-2004, 03:03 PM
We got our catcher yesterday... It fits real well on the mower and is built very well..Ill keep you posted on how well it works as soon as the grass starts growing again here in central IL..lol

QualityLawnCare4u
09-21-2004, 12:56 AM
Steely, I have a 737 with the acceleratorXL and it works wet or dry grass and packs great.

Danny
Quality Lawn Care

QualityLawnCare4u
09-21-2004, 01:04 AM
........................Grinder modifacation that Peter said would not change any warrantys.

Blakenship, thanks for the great closeup pic of mod. I need to do this to mine where it will be more flush, even though it works good now.

Danny

tat900
01-05-2006, 01:06 PM
I gotta question how hard is it to take on and off on some of my propertys i need to take it completly off to get in the back yards is it a pain ?

tat900
01-05-2006, 01:07 PM
and it wouldnt fit on my trailer with it on the side ?

QualityLawnCare4u
01-05-2006, 04:00 PM
I have a 737 and it works great with gator blades using the accelerator. However, I know longer need mine, would you like to purchase it? I now use the Exmark for bagging. Also Peter is fantastic to deal with.

tat900
01-06-2006, 10:47 AM
will the 737 fit on the 717a ? if so im defintly interested in it but curious how long it takes to take it off for it to fit on my trailer

PeterA
01-07-2006, 03:35 AM
This catcher will fit on all 48 and 54 7 iron decks-

tat900
01-07-2006, 09:17 AM
shoot me a price ill prolly buy it if it reasonable

greengiant9963
01-09-2006, 02:07 PM
I have a question. Will a accelerator bagger fit on a John Deere 737 or 757 with a Quick Chute on it. Wasn't sure if I would have to take the Quick Chute off to fit the bagger on. Any information would be very helpful.

tat900
01-10-2006, 09:09 AM
i have the 717a what is the quick chute i guess i m lost ?

greengiant9963
01-10-2006, 10:04 AM
i have the 717a what is the quick chute i guess i m lost ?

It is a adjustable side plate that goes over the discharge opening. You can go to www.qwikchute.com for more info.

tat900
01-10-2006, 10:34 AM
do u like it ?

greengiant9963
01-10-2006, 08:49 PM
do u like it ?

I have one on a exmark lazer and it works really well. I am looking to get a deere ztr this spring and didn't know if both would fit on the unit. They both do on my exmark. I was just curious.

tat900
01-11-2006, 02:10 PM
hey quality u figure price out for the catcher