Shindaiwa trimmer heads

[columbiaplower]

just wondering what works for you. What do you have? i m not worried about capacity but what feeds the best i am leaning twards the promatic do any of u have one? ANy thanks in advance<br>-Nick

[gorrell]

Personally I'd stay away from the automatic feed head. They waste a lot of line, and never seem to feed it out when you need it. Go with the bump and feed head and you'll not be disappointed. thanks, Lynn

[bob]

Nick, I'm one of the few people on this forum that use Shindaiwa fully-automatic heads. You control how much line is feed out. And 99% of the time it woun't let too much line out. The spools are small enough to fit in your pocket. Plus you don't leave those dounut rings in the lawn. Bob

[columbiaplower]

is the promatic fully automatic? i want a bump type head so with one?<br>

[southside]

I would stay away from a bump feed head altogether.I use a hard head which you just<br>use an 18&quot; length of line.As it wears out,<br>you just stick in another piece of line.<br>you save heaps of line with this head and <br>there's nothing to break.<p>Karl<br>

[columbiaplower]

no ss, way had a homlite like that and was replacing it every 5 min especialy when trimming aganst a fence