View Full Version : Chelated Iron results from PG Ultra - 1 week

06-28-2004, 02:24 PM
A week ago I sprayed Chelated plus Iron (12-0-0) on a property with KY Bluegrass. I ran one gallon (128 oz) in my mix. Also had 2 qts of Momentum and a 1/2 pint of spreader sticker.

I had seen on a earlier thread that people were getting results at 3 oz / 1000, but for easier figuring, I used 4 oz, which gave me the one gallon.

So far, the color of the grass is the one on the right, a decent green, but it isn't a deep dark forest green color like the one on the left. Is that the same results that the rest of you have gotten?

I know on the label it recommends 6-9 oz / 1000, but there have been others that say if you over apply, then the iron will have a tendency to turn your grass brown.

06-28-2004, 02:30 PM
Forgot the pic, sorry.....

06-28-2004, 02:34 PM
Too low a rate IMO. I use Ferromec @ 8oz with no problem.

06-28-2004, 08:34 PM
I am happy with the results from the 3 oz. per 1000Ft2. I have used the high rate in the past with the hose and expermented with minimum dosages as well. I am happy with the results from 3 oz. per 1000Ft2. You can up the dosage to the upper limit as avery prefers and it will be a darker shade of green for sure.
Continue your experments and find what works best for you.
One other note...........Iron is foliar absorbed and you will see results as soon as 48hrs. after application, but I feel the full effect is about a week after some rain or irrigation.

Keep us posted :D

Pete D.

06-29-2004, 03:52 PM
Originally posted by Avery
Too low a rate IMO. I use Ferromec @ 8oz with no problem.

Do you use a Perma Green to apply your ferromec?

06-29-2004, 10:30 PM
Nope. Just a tank and boom sprayer rig I fabricated to fit the Z Masters.