PDA

View Full Version : Double Blades


NEWTRACK1
07-22-2004, 02:55 PM
WHAT'S THE BEST WAY TO MOUNT DOUBLES INLINE OR CROSSED?
AND HOW DO YOU KEEP BLADES FROM TURNING. HAS ANYONE TRIED TO TACK WELD BLADES TOGETHER.:D

Mico Landscaping design
07-22-2004, 03:06 PM
dont understand wut you are talking bout!!

TROTTMAN
07-22-2004, 03:11 PM
You can't really run them inline, it would have a horrible cut and wouldn't mulch or discharge well.

You put then in a plus shap (+) or "x" shape - or crossed like you said. You put one over the other and just tighten it down, but you should probably use an impact wrench. Most guys do it that way.

NEWTRACK1
07-22-2004, 03:13 PM
I GOT THE GATOR BLADE ON TOP AND THE REGULAR DLADE ON THE BOTTOM , I HAVE THEM CROSSED LIKE THIS + , BUT WHEN I TIGHTNEN THEM THEY MOVE JUST ABOUT THE TIME THE BOLT GET
REAL TIGHT ,THINKING ABOUT TACK WELDING THEM .

TROTTMAN
07-22-2004, 03:16 PM
I wouldn't bother welding them either, more of a hassal to remove if one were to break etc. Plus you shouldn't need to do this.

NEWTRACK1
07-22-2004, 03:24 PM
Thanks trottman i am new to this double blade deal i will give it a try. do you run doubles all the time.

Aaron Marshall
07-22-2004, 03:40 PM
Anyone ever tried double blades on a walker in an X shape? I would like to try this, but unsure if it will work?
Thanks
Aaron

walker-talker
07-22-2004, 03:51 PM
Originally posted by Aaron Marshall
Anyone ever tried double blades on a walker in an X shape? I would like to try this, but unsure if it will work?
Thanks
Aaron It won't work because of the timing. I wouldn't even try. I sent you a PM.

Matt