PDA

View Full Version : Gravely 260Z


BSDeality
08-05-2004, 10:55 PM
are there any plans on getting a bagger setup for a Gravely 260Z (2004) ? With the fall soon approaching I'd like to have a bagger for my new machine.

If you don't have any plans i'd be happy to work with you to get you dimensions and all that fun stuff.

Thanks

PeterA
08-06-2004, 04:36 AM
Is this a 60 inch deck? If it is a pro G or pro H deck the GCGR or GCGRXL will fit. If we don't have a fitup for your mower, we may be able to do a custom fitup for you. Call me at the office or email and I will try to get you taken care of!

BSDeality
08-07-2004, 01:46 AM
it is a 60" deck. I'm not sure if it has the same deck as the WB's. it has the "air-flo" deck.

PeterA
08-07-2004, 08:19 PM
Could you post a picture of the discharge area of the mower? also a few measurements of the opening would help. The pro G and Pro H have an opening that is about 15 inches long and 5 1/4 tall.

BSDeality
08-11-2004, 07:19 PM
sorry about the delay peter. its been a rough weekend and busy start to the week. here are the pictures and dimensions. I'll try to illustrate them as well as possible.

Dimensions:

A - A : 22+1/8"
B - B : 4.5"
C - C : 2+7/16"

BSDeality
08-11-2004, 07:20 PM
der... a picture is worth a thousand words.....

BSDeality
08-11-2004, 07:28 PM
here's another view of b and c

d is 1+9/16".
the thickness of the vertical plate is 3/16"


also, in the first picture you can almost see how the deck tapers back in the front. If you were looking straight down at the vertical plate the length of "A" would be 22+1/2". since the deck tapers the length "A" @ the discharge is 22+1/8"

Let me know if you need a picture of that or if you can visualize it.

PeterA
08-12-2004, 01:32 AM
Thanks for all the nice pics. I think we could do a catcher for this pretty easily. I can't quite tell from the pictures if the opening is flush- ie. if you put a flat board against the opening would it close it off or would there be gaps? It looks like there might be a small gap at the front below the blade, but that would not be a problem. Call me if you want us to make you a catcher for this mower.
PS- I will be gone on vacation next week.

BSDeality
08-12-2004, 08:43 AM
it does have a gap at the bottom just below the blade. the gap is present on the front and rear vertical walls of the deck.. I'll get that measurement for you today.

I think i would like a catcher made