View Full Version : How hard could it be?
10-03-2004, 10:58 PM
i hard would it be to ramp a 32 inch gear drive walk behind up into a truck bed. I have a dodge ram 4x4 so its pretty high up there. I know some of you work this way but most of you have trailers. This would just be temp.
10-03-2004, 11:05 PM
If you have any experience you shouldn't have any problem. The longer the ramps, the lesser the incline, or almost as important, the decline coming out of the truck. I do it occasionally swapping with crews or running to repair shop.
Just make sure ramp is securely attached to truck.
10-03-2004, 11:32 PM
Its quite easy but if your not careful or your brakes or belts slip you could have a 400 pound mower sitting on your legs. Never seen it but I have heard about it just take it easy.
10-04-2004, 09:43 AM
I actually have a dodge ram 4x4. I have some aluminum ramps that are used for an ATV. I have gotten my exmark 48 into the bed of the truck. The faster you go the better as siad before just make sure the ramps are secured.
vBulletin® v3.8.6, Copyright ©2000-2015, Jelsoft Enterprises Ltd.