hydros

[awm]

Im wondering what the max i can pull w
my exmark ztr.Im not talking about power
but treating the equipment right.
The potential to pull is a lot,but do
the hydros and other drive train components
hold up to that kinda stuff.THANKS

[BUSHMASTER]

Id the hydro and get a service manual by the manufactur of the hydro.The spec's on your model should be given,Eton has a manualyou can down load.

[awm]

I should have been more specific with my post.
The question is can i use my exmark 20 hp
ztr to pull loads or is there a limit to
what i should do so as not to harm the hydros.
My tractor hydrostats can handle anything the motor
will pull SO i need to know.THANKS AGAIN

[rdh]

dont know about pulling.but when i cut behind my barn i
push a car out of the way that has 2 flats and hasnt hurt
my ztr it feels like the car is not there.

[awm]

D--- RDH thats says right smart there.
Move a car w flat tires.Mines just 20hp
kohler,but it could be fun to see how
well it works if its safe. thanks for
the input bushmaster an rdh.

[BUSHMASTER]

in the specs provided by manfu. of hydro my case a walker with eaton 7 can pull aprox a 3600 lbs - 8-900 lbs do the math . look on your hydro find the mnufactor ,go to thier web site and look up the specs

[Mark]

Ive pulled over a thousand lbs with my z 25hp, But Bushmaster is right check with you manuel or dealer.

[Administrator]

Maybe try and potst this question directly on http://www.turfmfg.com and a eXmark rep will get to you with the answer.

Chuck Keough

[awm]

I posted and was sent back here so I guess its not quite
ready yet.THANKS ANYWAY