PDA

View Full Version : Jacobsen HR-15 weight? (need to haul)


PPrash
03-13-2005, 06:19 PM
I bought a Jacobsen HR-15 out of state. I need to go get it next weekend. Not sure which trailer to take based on its weight as I have a standard car trailer with 6 bolt axles or a heavy duty car trailer with 8 bolt axles. Anyone know what one of these things weigh?

Grassmechanic
03-14-2005, 07:37 AM
Boy, it's been a while since I've operated a 15. They are rather heavy, with all the reels. I'd take the heavy duty trailer just to be on the safe side.

MOW ED
03-14-2005, 08:07 AM
I don't know exactly what a HR-15 is but mayby you could compare it to some of the stuff on the Jake site. I see a HR 5111 weighs around 3300#. But I would always take the heavier of the two because that is my luck to bring a lighter one then wonder why I just didn't go to the max.

http://www.jacobsencommercial.com/products/lg_area_rotary/

sdwally
03-14-2005, 10:12 AM
According to our manual the transport weight is 6400lbs. (Approximate). Probably depends on the cutting units, rather they be rotary or flail. Our manual is for the HR-15 model 70520 serial # 1742 & up. Ours has the Perkins diesel engine.
Hope this helps.

PPrash
03-15-2005, 10:16 PM
This is perfect. Thanks for the feedback. I will take the big trailer.

PPrash
04-17-2005, 09:00 AM
SDWally,

Any chance I could get a copy of the wiring diagram if you would have one in that manual? I dont have a pressing issue but will be glad to have it if something electrical starts to happen. Also, does anyone know a generic Goodyear or Gates belt # for the decks? I want to have one on hand for the time when I need it.