PDA

View Full Version : trailer gate/ramp


Kingbman1
03-16-2005, 10:06 PM
ANyone know of a website where i can buy a ramp/gate for my trailer??

Mo Green
03-16-2005, 10:13 PM
May be easier to buy a trailer with a ramp already on it.

BSDeality
03-16-2005, 10:13 PM
by the time you pay for freight you could probably have one fabricated locally for the same price or less.

Guthrie&Co
03-16-2005, 10:14 PM
i think you would be better to have awelding shop make you one to your specs. you could go with a half gate / spring assist etc etc ... you get the idea

Kingbman1
03-16-2005, 10:18 PM
how much you think it will cost me to put one on a 5x10 trailer?

Guthrie&Co
03-16-2005, 10:19 PM
i have no idea it depends on your areas market for a welder.
also what all you would want to have done. all you have to do is call a welder

walker-talker
03-16-2005, 10:30 PM
Probably a couple hunderd bucks, maybe a little more. Steel is at an all time high right now and is still going up. I built a small one that I mounted one on the side of my trailer a couple years ago for less than $100 in materials. The expanded metal is what cost the most.

bluemoon
03-16-2005, 10:30 PM
Try www.usaramp.com
also do a search, think I have seen several other vendors.

lawncare3
03-24-2005, 01:56 AM
how much you think it will cost me to put one on a 5x10 trailer?


I got a quote of $425 today for that size

lsylvain
03-31-2005, 12:18 PM
I have had that same question. I got a 7' wide trailer without a gate because it was good for the bobcat and that kind of stuff and I figured I would buy a gate for it. I never could find a 7' gate, everything was 6' or smaller. Ended up getting it fabricated so that the gate had the ramps for the Bobcat built in.