I need help! What is this called

[googles]

here is a pic of the part i broke while putting on my header gasket. I cant order the part because i dont know what it is called. Does anyone know what it is called and where i can order it.

[fixer67]

Going to need a little more info on this. What is it on? And where do all the pipes go. From what little I can see it looks like it may be part of the anti-smog system. The pipe looks to be copper but I am think that soldering it would not last long because of the heat. Now if you know some one in the heating and air business I bet they could patch it. Finding a way to patch it may be your best bed. From the looks of it I am wanting to say that is going to be a dealer only item meaning you will have to pay 5 prices for it from the dealer. Check you local junk yard. And use a lot of WD-40 or something on these tubing nuts they look awful rusted. Goo luck

[Tider6972]

That is an 'air injection manifold(pipe) ', and it is a part of your emission control system.

It carries air to the exhaust manifold to burn off unburned fuel.

[googles]

where can i buy it?

[grass_cuttin_fool]

I had mine on a 2.8 v6 chevy break or corode, heck they were 20 years old. Anyway I picked up a set at Car Quest Auto parts. I would think Napa or most parts places would have them and they were reasonably priced I thought

[jim dailey]

I had mine on a 2.8 v6 chevy break or corode, heck they were 20 years old. Anyway I picked up a set at Car Quest Auto parts. I would think Napa or most parts places would have them and they were reasonably priced I thought

Yes, the auto parts stores sell replacements. If you want, go to a mechanic or welding shop and they can BRAZE the pieces together. Check it out both ways, price wise.

[John Gamba]

Have it tig welded. If you try hard enough you can twist :realmad: off the other nuts and you will need the exhaust manifolds to :angry:

John