View Single Post
  #4  
Old 07-01-2005, 11:14 PM
Restrorob's Avatar
Restrorob Restrorob is offline
LawnSite Fanatic
 
Join Date: Apr 2005
Location: Show'n my truck off !
Posts: 10,729
Quote:
Originally Posted by 97firebird
The motor runs perfectly fine with no oil dripping. It only starts to drip out of the valve covers when the motor is under load for a little while. I can't see what could plug the breather system really...Its is only an umbrella valve and a hose. However, I have been hearing a lot about a breather problem..but I think the replacement you are referring to is for the newer model Kohlers. Thanks for the input though.
If you refer back to the service bulletin I posted in one of your other threads about the installation of the breather assembly they gave the part number for a new reed style breather assembly to take the place of the old umbrella type
because there was a problem with them.
BTW; Did you get the cylinder leak-down test performed ?
__________________
Quote:
Originally Posted by piston slapper View Post
You never learn anything until you admit you don't know it all...
Quote:
Originally Posted by MannsLawnService View Post
some times the man in my mirror isn't so smart...
"Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!
Reply With Quote
 
Page generated in 0.04152 seconds with 7 queries