View Single Post
  #3  
Old 07-05-2005, 08:01 AM
Restrorob's Avatar
Restrorob Restrorob is offline
LawnSite Fanatic
 
Join Date: Apr 2005
Location: Show'n my truck off !
Posts: 10,778
Quote:
Originally Posted by tpsball
I have a briggs 20 hp v-twin vanguard model #351777, type 1044e2. I was changing the oil and totally broke the base where the oil plug is. There is a 4" metal nipple that screws into the base for easy oil removal and somehow that broke at the threads and wiped out the base. No way to thread the nipple back into the base. Anybody have any suggestions where to find a new or used base for this engine? or part # thanks
Well the part# for a new sump is 808846 and it comes as a kit with the gasket and crank seal and a couple other parts. Really don't know if you will find a used replacement but, Good Luck !

Btw, Always put a small pipe wrench on the pipe before removing the cap.
__________________
Quote:
Originally Posted by piston slapper View Post
You never learn anything until you admit you don't know it all...
Quote:
Originally Posted by MannsLawnService View Post
some times the man in my mirror isn't so smart...
"Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!
Reply With Quote
 
Page generated in 0.03840 seconds with 7 queries