Thread: F935 problems
View Single Post
  #5  
Old 08-31-2005, 10:35 AM
f935boy f935boy is offline
LawnSite Member
 
Join Date: Apr 2005
Location: Md
Posts: 5
It all makes sense! While I was tinkering with the fuel filter and injectors, I started to remove the pump just to look at how it works and possibkly clean it out. I removed the 4 bolts that hold in onto the side of the block but I couldn't get it all the way out. It felt like it was hanging up on a shaft or a gear or something? So, I just put it back in place and bolted it down. I turned the tractor over after that and it squirted fuel out of each of the three ports on the top so I thought it was back in the right place. But, did I somehow move a gear or ?????? That would explain the timing. I have not had time to look at it or get into the book to see how to set the timing. I'll let you know. The timing thing also explains why it wouldn't start with starting fluid. right?
Reply With Quote
 
Page generated in 0.03610 seconds with 7 queries