View Single Post
Old 03-27-2006, 05:30 PM
PeterA's Avatar
PeterA PeterA is offline
Join Date: Jul 2001
Location: Bellevue, WA
Posts: 543
You can use the GCSC catcher. The way you use the bracket is a bit non standard, as this mower has an unusual opening. There is a small tab with a hole in it near the front on the opening on the top of the mower. You need to use the hole in this tab to receive the pin sticking out from the catcher. The bracket should attach to the edge of the mower just behind this tab. The bracket has a hole near the front that you won't use (use the hole in the tab on the mower instead). Call us if you have any questions.

Peter Andonian, Lawnsite Sponsor
Accelerator Industries
Page generated in 0.03843 seconds with 8 queries