View Single Post
  #2  
Old 04-13-2006, 09:05 PM
lucforce lucforce is offline
LawnSite Member
 
Join Date: Mar 2006
Location: Mobile AL
Posts: 225
Spark generator? I am assuming that you are referring to the ignition coil.

You should have gapped these ignition coils to spec, I assume that you did.

First, check for spark on BOTH cylinders after the engine dies and verify that you do have an ignition problem. If you have no spark, disconnect the white wire to the engine that grounds the ignition coils. Look for the white wire to be burned, pinched, or chaffed under the blower housing.
Reply With Quote
 
Page generated in 0.04165 seconds with 7 queries