View Single Post
Old 06-02-2001, 02:34 PM
lawrence stone's Avatar
lawrence stone lawrence stone is offline
Join Date: Jan 2000
Location: anthracite valley, commonwealth of pennsylvania Winter residence: Charlotte County FLA
Posts: 2,079
Cheap OCDC for a Toro

I am in the final design phase of my homemade discharge control for all my walkbehinds.

All my machines have a bracket to accept a wright mfg metal bagger.

To make the dischage chute I was going to recycle the OEM deflector.

To clear the bagger bracket I am going to mount the defector brackets to a bit of 1 1/2" square steel (scrap metal from a Jcro bar).

This way the deflector will clear the bagger bracket, be out of the way when up to mount the bagger, and the deflector will be on more of a downward angle to keep clipping and objects from being thrown very far.

The springs will be removed from the deflector mount so the defector can be controled by pushing a knob on the dashboard via a universal manual choke cable from an auto parts store.
Reply With Quote
Page generated in 0.04094 seconds with 8 queries