View Single Post
Old 06-04-2001, 07:11 PM
sdwally sdwally is offline
LawnSite Senior Member
Join Date: May 2001
Location: San Diego, CA
Posts: 385
You need to check with a dealer. The last message hinted at recall notice on those caps. I did check my parts manual for the P216s, however my manual only goes to I/11313. You engine is diffinetly newer. In my manual they list 11 different caps w/dipsticks and 3 different tubes, all of which slide into a rubber seal at the crankcase. If you want to change tubes and caps you'll need to consult a parts manual that covers your specification number. The specification number designates all the different options available for each engine. The H in your spec number designates that engine has had 8 major manufacturing changes.
The manual also list an o-ring that goes on the cap. Maybe try a new o-ring or one that has a slightly large diameter. Hope this helps.
Clay Walsten
Developed Regional Parks
City of San Diego

We enrich lives through quality parks and programs.
Reply With Quote
Page generated in 0.03899 seconds with 8 queries