Thread: stuck blade
View Single Post
  #6  
Old 08-21-2006, 11:55 PM
1grnlwn's Avatar
1grnlwn 1grnlwn is offline
LawnSite Bronze Member
 
Join Date: Aug 2001
Location: Central Illinois
Posts: 1,257
There are a couple ways to increase the loosening torque of a air gun. Increase the air pressure to the max avaiable. Sometimes the gun will have speed settings. Use fastest speed. If the bolt goes all the way through, put a wrench on the opposite side and back it against something solid. This gives the hammer in the gun something to hammer against. Also put some penetrating oil on the nut and threads. Don't be afraid to keep that trigger on for a while, sometimes when you are about ready to give up, it breaks.
Reply With Quote
 
Page generated in 0.04256 seconds with 7 queries