View Single Post
  #7  
Old 08-23-2006, 03:27 PM
CraftyRider CraftyRider is offline
LawnSite Member
 
Join Date: Apr 2006
Location: Eastern Kentucky
Posts: 6
Quote:
Originally Posted by Idealtim
If its gravity feed [wich i think it is] then the line befor the filter is plugged or line is not pointing down enough. Try re routing the line higher from tank to carb should be a almost constant horizontal line.. if there is a filter or screen at the bottom of tank, that may be plugged also.
I've verified the line is clear between the filter and tank. I'm not sure how to keep the fuel in a line horz. It has to drop down out of the tank and route under the floor board then back up to the carburerator.

I might see if I can use Eddie's suggestion and pull slack from the tank and raise the filter itself. Appreciate everyone's input!
Reply With Quote
 
Page generated in 0.03625 seconds with 7 queries