View Single Post
  #9  
Old 03-05-2000, 11:39 AM
GrassMaster GrassMaster is offline
Senior Member
 
Join Date: Dec 1999
Location: Columbus, JawJa of the great U.S.A.
Posts: 447
Hello:<p>After having a couple of expensive flats & learning the hard way, I put Slime in everything.<p>We took it a little further with the air tank. I got tired of the air tank, so we got one of those 12 volt plug in air compressors. Then later we cut the plug (cigarette lighter plug) end off then & attached 2 battery clamps.<p>This way we could take the pump to the mower & hook it up to the mower battery. Instead of taking the mower to the truck so we could plug it in.<p>Sometimes if you start loosing air fast & try to make it to truck, the bead would seperate, then it is a real pain to get the bead to seal back.<p>We kept the tank mainly for doing on the spot carb work & cleaning out air filters. We had a quick disconnect so we could put spray chuck or a tire chuck end on it.<p>It worked out very well & saved us a lot of downtime.<p><br><p>----------<br>GrassMaster - Home: www.lawnservicing.com<br>My Start Up Page www.lawnservicing.com/startup/
Reply With Quote
 
Page generated in 0.04199 seconds with 7 queries