Thread: Need a 32"
View Single Post
  #2  
Old 03-06-2007, 09:39 AM
bigmudder77's Avatar
bigmudder77 bigmudder77 is offline
LawnSite Senior Member
 
Join Date: Feb 2007
Location: wooster ohio
Posts: 297
ya go for the 32. but i had some gates that i could get the 36 in. really its up to how big the gate is. i had some gates that i could drive my truck through (they were pasture but still) and it also depends on how much your gonna mow after you get through that gate

ok lets say the gate is 40inches wide with a 1/4 an acre to mow once you get through your 32in could mow it but a 36in would go faster

but say the gate is only 30in with 1/4 acre to mow? then you would need the 21in (or a pull behind mower and a small tractor)

see what i mean you can have different gate sizes with bigger or smaller yards on the inside. depending on every thing the way to go would be how big all the gates that you go through are
__________________
2002 dodge ram 1500 4x4

1999 dodge ram 2500 4x4 (ex plow truck needs tranny work)

1998 dodge ram 2500 ext cab needs all new lines (soon to be the new plow truck)

curtis plow 7 1/2ft 4 years old

1995 7ft X 16ft trailer

woods diesel zero turn 5ft mowing deck (60 inch) 6-7 years old

and a whole lot more ill up date later
Reply With Quote
 
Page generated in 0.04604 seconds with 7 queries