View Single Post
  #2  
Old 08-30-2007, 01:04 AM
PeterA's Avatar
PeterA PeterA is offline
Sponsor
 
Join Date: Jul 2001
Location: Bellevue, WA
Posts: 543
You can use all high lifts if you like. Each high lift draws about 1 extra HP from the engine to drive it though. You can test each configuration to find out what is best for your mower. If you have plenty of extra power with your machine, it is not going to be an issue. The only other consideration is front end blow out of clippings. With a high lift only at the discharge, the clippings are "sucked" across rather than pushed from the other 2 blades, minimizing droped clippings and stray clippings coming out the front of the deck. Each mower has it's own charateristics though, so your results may vary.
__________________

Peter Andonian, Lawnsite Sponsor
Accelerator Industries
http://www.AcceleratorIndustries.com
800-984-9410
Reply With Quote
 
Page generated in 0.04085 seconds with 7 queries