View Single Post
  #3  
Old 09-02-2007, 05:55 PM
zedhed zedhed is offline
LawnSite Member
 
Join Date: Aug 2007
Location: elgin, illinois
Posts: 6
there was a big gash in the muffler, i unbent the part that was bent in and rewelded the muffler closed.
with the engine running i have put a 2 x 4 over the end of the muffler and pressed it tight to see if that would make any difference but no change.
as for the valve clearence, i dont remember but i can reset them per your rec, and thanks for that.
as for exhaust coming out of the muffler, there is enough to move the dust on the floor 3 ft away, not too scientific i know.
Reply With Quote
 
Page generated in 0.04040 seconds with 7 queries