View Single Post
Old 09-12-2007, 01:01 AM
Louisianagames Louisianagames is offline
LawnSite Member
Join Date: Sep 2007
Location: Mississippi
Posts: 16
Ok here goes..
Checked compression 100 lbs on both sides.
1 cylnder I noticed as I shined the flash light in it looks like gas and oil on the cylinder wall (bottom) spark plug is caked up inside the ceramic/cathode.
And it looks like oil is leaking down from under the valve.

Where to start?
Pop the head off?
To add to it it does have a fuel pump with four phillip screw holding it to the block..Its about 2 x 2 inches

Thanks a million!
Reply With Quote
Page generated in 0.03736 seconds with 8 queries