View Single Post
Old 09-28-2007, 03:25 PM
Lite4's Avatar
Lite4 Lite4 is online now
LawnSite Gold Member
Join Date: May 2007
Location: Indianapolis, IN
Posts: 3,080
Sleepyhead, I used the screw mount with stainless steel screws.

Columns, I ran the wire in the gutter. I drilled 2 holes. 1 above the gutter through the facia down at an angle into the soffit cavity. I then drilled a 1" hole in the soffit and chased the wire from the gutter out through the hole in the soffit. The fixtures are Vista 2116 copper directional spot with a 20w BAB bulb and frosted lense. I mounted the fixture to a round copper flush mounting canopy.

Tim Ryan
Lite4 Outdoor Lighting
Reply With Quote
Page generated in 0.03156 seconds with 8 queries