View Single Post
  #1  
Old 04-03-2002, 07:34 PM
maacla maacla is offline
LawnSite Member
 
Join Date: Sep 2001
Location: Pennsylvania
Posts: 10
Kohler 18 to 20 hp

I bought a used Lazer Z last fall. It has the 18hp engine. I have read that it can be raised to 20hp by removing the throttle stop screw and changing the governor spring setting. Well I cannot see how this will achieve this. Removing the stop screw seems to allow higher rpm's but I could have achieved this by putting the governor spring in the next hole. Also I noticed that specs on both engines are rated at 3600 rpm. If the rpm is set at 3600 then how could the hp be raised? Mike
Reply With Quote
 
Page generated in 0.04149 seconds with 7 queries