View Single Post
  #2  
Old 06-24-2000, 11:12 PM
John DiMartino John DiMartino is offline
LawnSite Silver Member
 
Join Date: Jan 2000
Location: Walden,NY
Posts: 2,555
If you hava an EFI 350 or 454,the ignition coil has 2 2wire connectors on it.on set goes to the module under the cap,the other set is the power and tach wires,these are the ones you need.there should be a thick pink or orange wire and a white wire,the white is the tachometer -.T-tap it or splice it there or if you want a cleaner appearance or more weathertight spot,pull the ECM down from behind the glovebox and find the white wire there too.Good luck<p>----------<br>John D<br>
Reply With Quote
 
Page generated in 0.04079 seconds with 7 queries