View Single Post
  #3  
Old 06-06-2002, 02:48 PM
Budman Budman is offline
LawnSite Member
 
Join Date: Mar 2002
Location: kentucky
Posts: 65
The old PTO belt was mangled when I bought the mower. This was caused by the locked up spindle and the pulley that had worn out on its shaft. Both of these were replaced, along with new PTO & deck belts that I got from J Thomas. It is fine when the deck belts are engaged. The howling sound occurs when the deck blades are disengaged and the main pulley on the crankshaft starts rubbing the PTO belt.
Reply With Quote
 
Page generated in 0.04066 seconds with 7 queries