View Single Post
Old 04-01-2000, 10:53 PM
Doug406 Doug406 is offline
LawnSite Member
Join Date: Jan 2000
Location: Michigan
Posts: 134
I agree with Abe, buy a set of lift blocks from a 4x4 center(or magazine), you can get them in any height from 1 to 6 inches. The kit will cost about $50 and include the U bolts that you are going to definety torch off. It may not be a bad idea to add more spring packs also, just buy a new center bolt from a parts store, use a cut-off wheel on the old one and put more packs in.<br> <br>
Reply With Quote
Page generated in 0.03592 seconds with 8 queries