View Single Post
  #2  
Old 03-19-2000, 02:35 PM
yortengel yortengel is offline
LawnSite Member
 
Join Date: Mar 2000
Location: Clawson, Mi
Posts: 216
We need to know what type of hubs you have, Auto matic or manual? The auto matic hubs require the front drive shaft to turn to engage them. the manual hubs just have on and off. Either way, you will need to go to the library and get a service manual. They are either assembled incorrectly (common problem) or they are blown. Remember, only one hub has to not work for your 4WD to be inoperative. Also check the front drive shaft, the slip yoke has a tendency to strip out if not greased regularly (another common problem) Good luck.<br>Troy<br>PS Donít forget to also grease the CV joint in the front drive shaft, It has a small grease fitting in between the two U-Joints. You will need a needle fitting for your grease gun. Good Luck.<br>
Reply With Quote
 
Page generated in 0.03763 seconds with 7 queries