View Single Post
Old 01-26-2009, 04:47 PM
Michael J. Donovan's Avatar
Michael J. Donovan Michael J. Donovan is online now
Moderator, Online Communities
Join Date: Feb 2005
Location: Pennsylvania
Posts: 3,078
All Fluid Film Users Please Read!

Attention Forum Members:

We at Eureka would like to express our sincere gratitude for all your continued support.
We understand that many of you have experimented with and developed your own uses for Fluid Film®. However, please keep in mind that you should read all warning labels carefully before attempting any application that we don't specifically recommend and, above all, use common sense before you start your experiments.

Our labels and product materials make it clear that the contents of our spray cans are under pressure and are extremely flammable. Any aerosol product, including Fluid Film®, should be kept away from a point of ignition, such as sparks, heat, matches, open flames (such as welding equipment), operating motors or engines, or anything else which could ignite the contents or the propellant.

We have done our best to discourage uses which could result in injury or damage, but once the product leaves our control, it is in your hands. If our product is not being used for its intended purpose, Eureka cannot bear any responsibility for injuries, losses or damages. If you have any questions regarding a specific application, please don't hesitate to contact us, either through the forums or at our toll free number: 888-387-3522.

Thanks again for your cooperation, interest, and support.

Fluid Film Staff
Michael J. Donovan, Sr.
Page generated in 0.03934 seconds with 8 queries