View Single Post
  #2  
Old 03-10-2009, 09:49 AM
WrightCommercial WrightCommercial is offline
Sponsor
 
Join Date: Apr 2008
Location: Frederick, MD
Posts: 507
rlmelton,

The gauge in the tanks is a compression fit so you should be able to pry it out. Two things could cause this issue, either the gauge grommet tore when put into the tank, or the gauge hole in the tank is not true and is not letting the grommet seal properly. So the fix will be either a new tank or a replacement grommet. When you pop out the gauge we will be able to verify the issue, please call us at (301)-360-9810 and we will take care of the issue.

Best Regards
Wright Mfg. Service Dept.
Reply With Quote
 
Page generated in 0.04220 seconds with 7 queries