View Single Post
Old 04-01-2009, 06:30 PM
djagusch djagusch is online now
LawnSite Gold Member
Join Date: Mar 2006
Location: MN
Posts: 3,985
Normally when I change the fluid I also fill the filter with oil before installing it to reduce air in the system. After you run it for the 5 minutes make sure to check the oil level again. Also if you didn't fill the filter up you'll probably have little air bubbles in the oil. It would be best to let it sit overnight again (for the little bubbles to work out) before running it hard.
Reply With Quote
Page generated in 0.03388 seconds with 8 queries