View Single Post
  #5  
Old 05-09-2009, 06:58 PM
ArizPestWeed's Avatar
ArizPestWeed ArizPestWeed is offline
LawnSite Bronze Member
 
Join Date: Apr 2004
Location: On the Toilet
Posts: 1,450
Quote:
Originally Posted by Think Green View Post
Arizona,
Did you insert a T-barb in there between the nozzle hose and reroute the flow for bypass? At 60 p.s.i. without a bypass flow, it would blow the seals or leak somewhere within the nozzle when you aren't continually using the apparatus. I am applying at 45 psi in my solo's, with the pump method, and they tend to leak at weak joints. There isn't enough teflon to keep these things from leaking at the wands.
I buy agricultural wands and without most suppliers using brass now, they are prone to leaking all over the place.
The pumps are turn off when they reach a certain pressure .
I for get what they call this
http://www.northerntool.com/webapp/w..._357081_357081
Reply With Quote
 
Page generated in 0.03386 seconds with 7 queries