View Single Post
Old 06-15-2009, 07:21 PM
Breezmister's Avatar
Breezmister Breezmister is online now
LawnSite Bronze Member
Join Date: Jul 2007
Location: South Jersey
Posts: 1,401
Originally Posted by ralph84 View Post
. However, I don't know what to do to move that pole out of the way.
Am I just not strong enough to loosen the nuts and take the spindle off, because I tried that to no avail.
Lesco has two different belt guides. One is just a tube over a carriage bolt topped off with a nut to hold it in place. Once you get the nut loose, you might have to tap the guide or even remove the carriage bolt. The other style is shaped like a L and is just held on with a bolt. Just loosen the bolt a few turns and it should move out of the way for you. Both will need a 9/16 socket. If you have to, get a breaker bar and a small piece of pipe to help give you alittle more leverage, just be careful.
Reply With Quote
Page generated in 0.03884 seconds with 8 queries