View Single Post
  #10  
Old 08-27-2009, 12:42 AM
rknarr2 rknarr2 is offline
LawnSite Member
 
Join Date: Aug 2009
Location: Morgantown, WV
Posts: 16
Replaced flange spacer but it did not help fix the problem

I put on a new flange spacer but that did not help.
As I mentioned above, I have also put on a new muffler and put on a carburetor kit but those did not help either.
So, maybe if I take the valve seal out of the carburetor and clean that in mineral spirits and replace the spark plug might be the next things I will try.
If that would not fix it, then should I look at taking off the cylinder and looking at the valves to see if they are sticking or taking a look at the idle speed on the carburetor. I am not sure what to try next running out of options and ideas. If you want to know what my problem is please review the initial thread above. Thank you.
Regards,
Robert

Last edited by rknarr2; 08-27-2009 at 12:47 AM.
Reply With Quote
 
Page generated in 0.03938 seconds with 7 queries