View Single Post
Old 10-10-2009, 10:25 AM
krider's Avatar
krider krider is offline
LawnSite Member
Join Date: Feb 2009
Location: Massachusetts
Posts: 129
This is my setup. Built it in 2001 and still use the same box today. I load it on the truck with forks that go in fork slots in the rear. A year or so after I built the box I went with a front mount vac. Here is the pic of that setup in a different post.

This box was made out of angle iron and 3/4 plywood finished with deck stain.
Attached Images
Reply With Quote
Page generated in 0.03439 seconds with 9 queries