From a reel grinding, technician stand point I think the Tru-cuts are the biggest pos on the market today for commercial use.
Personally I wouldn't recommend reel mowers unless the terrain is sloped beyond 8 degrees or so and very sharply at that.
Do yourself a favor, check out the Hyiater mowers available from Seagro - they market these rotarys which will cut at 1/2", stripe as well as a reel mower, collect debris and are easy to maintain.
I have posted many times about the mechanical faults associated with the Tru-cut design, the extreme difficulty in squaring the reel to the spin grinder do to the frame orientation plus the bed knife is a royal pain in the butt to remove from the frame without tweaking the frame even the slightest out of square.
For occasional homeowner use these Tru-cuts are marginally acceptable, for commercial use - not at all.
Nice Try = You Suck Spelled Differently