View Single Post
  #18  
Old 02-17-2010, 05:00 PM
MackCat's Avatar
MackCat MackCat is offline
LawnSite Member
 
Join Date: Sep 2008
Location: North Carolina
Posts: 148
Quote:
Originally Posted by GWhunter View Post
At the risk of an attempted hijack, I've got a few questions about this style of cutter(Davco,Ammbusher,repainted Fecon,etc) I do alot of mowing and I'm using a tractor at present. I would really like to get a tracked skid and a davco. I turn down alot of work that this type of cutter would be great at. But I'm gun shy about the carrier. I was strongly leaning towards a ASV SR80/
PT80 high flow for this. I'm finding them just too pricey for my taste. What would be a good compromise of either ctl of wheeled unit with OTT's? I'd be using it for about 50% mowing and the rest normal skid work( forks,dirtwork,grapple). Is high flow a must? I was interested in Ted's comment about what to do with the tree when down. I was figuring to lift the cutter and then lower it into the brush. Is there any reason not to do this? Sorry for the Hijack Chris.

Matt
High flow would definetly run the cutter better and Imo is easier on the machine. as far as lowering the cutter onto brush or trees, the only reason not to do this would be if you are near houses or cars because it throws things like crazy. i hit my Dads truck with a stick he was about 200 feet away and it dented his door
Reply With Quote
 
Page generated in 0.04717 seconds with 7 queries