View Single Post
Old 03-29-2010, 03:36 AM
Stuart Lawn Care Inc. Stuart Lawn Care Inc. is offline
LawnSite Member
Join Date: Mar 2010
Location: Lake & Orange County FL
Posts: 5
261t problems

Originally Posted by LwnmwrMan22 View Post
Some of the issues can be from the carbon buildup at the exhaust port too.

If it runs when it's cold, then starts to bog when it's hot, it's because the exhaust can't escape the engine.

Pull your muffler off so you can see the exhaust port all the way to the cylinder.

I used to just throw these trimmers away every year (2-3) because the guys said they would quit working.

Two winters ago I dug into one after reading posts on here.

I found that the biggest problem on ALL of them was the carbon buildup. I scraped the buildup out of the exhaust port, making sure that the piston was all the way up to keep carbon from going into the cylinder.

They ALL ran just like new.

I ended up making a killing on used trimmers that spring, selling each of them for $150 each on CL.
New on/how to work this site. It's 2 am but got a reply 1 block up. Did it wrong I guess. Thanks Man

Last edited by Stuart Lawn Care Inc.; 03-29-2010 at 03:43 AM. Reason: wrote/replied wrong
Reply With Quote
Page generated in 0.03796 seconds with 8 queries