View Single Post
  #4  
Old 04-30-2010, 07:24 PM
dutch1's Avatar
dutch1 dutch1 is online now
LawnSite Silver Member
 
Join Date: Dec 2004
Location: Jayhawk
Posts: 2,178
If your carb is exactly like the one in the diagram, I believe there is only one O ring and that is part #8, between the carb body and the rotor cover. There is a nylon roller that rotor cams on and it sits on a pin inside the carb body. If the roller breaks the engine will idle erattically. I've opened a few of those carbs up and found two pieces of the roller in the bottom of the carb. The roller is illustrated just below the oring.
Reply With Quote
 
Page generated in 0.04311 seconds with 7 queries