View Single Post
  #40  
Old 05-16-2010, 04:54 PM
ed2hess's Avatar
ed2hess ed2hess is offline
LawnSite Fanatic
 
Join Date: Nov 2002
Location: Austin Texas 78727
Posts: 11,365
You might need to go to the next level.....you need to inspect to see if both crank seals are in place. The one behind the clutch is hard to see but if there is oil coming out you can see it and normally it is the recoil side that comes out. I guess you put new fuel lines and replaced the two gaskets for the carb. If that isn't the problem pull the head and clean out the transfer ports and be sure the rings are free. Put on new head gasket when you put the head back on. And it that doesn't get it then go to the shop and have them do a leak test or do it youself if you have the tools.
Reply With Quote
 
Page generated in 0.04309 seconds with 7 queries