View Single Post
  #1  
Old 06-23-2010, 09:28 AM
gewald gewald is offline
LawnSite Member
 
Join Date: Jun 2010
Location: New York, NY
Posts: 2
Problem with Suzuki 2-cycle engine

Picked up an old 22041 push mower (contractor model) with a Suzuki 2-cycle engine. Hadn't been run in a while so the fuel line had turned to mush. Replaced the fuel line and filter and the primer bulb and I have tried to clean the carb but I still can't get it to run. Engine starts with gas poured into spark plug opening. I replaced the three gaskets closest to the engine. Cleaned off the needle, but I think the jet valve might be the next thing to tackle. Will try soaking it in carb cleaner. Haven't figured out exactly the flow of fuel through the carb yet.
Reply With Quote
 
Page generated in 0.04686 seconds with 7 queries